Inside our production floor

The equipment behind every transfer

A connected print, powder, cure and quality-control workflow turns approved artwork into press-ready DTF transfers. Each stage has one job: keep the result clean, consistent and ready for your heat press.

Order a gang sheet Prepare your artwork

The production line

Every stage protects the next one.

Good DTF output is not created by one machine alone. It comes from controlling the complete path—from the file entering the queue to the finished roll leaving the line.

  1. Colour reference charts used to check print colourARTWORK
    01 / PRE-FLIGHT

    Artwork preparation

    Before ink reaches film, the file is checked for sizing, transparency and layout. The production file is then prepared for the print queue so the supplied artwork stays connected to the order.

    • Final dimensions reviewed
    • Transparency and edge check
    • Gang sheet layout confirmed
  2. A gang sheet printing on the DTF printerCOLOUR + WHITE INK
    02 / PRINT

    Colour and white-ink printing

    The image is built in colour with a white-ink layer on transfer film. Controlled film movement and ink delivery help preserve fine artwork, solid coverage and clean registration.

    • Colour and white layers aligned
    • Film feed monitored
    • Print condition checked through the run
  3. Close-up of cured adhesive powder on a printed transferPOWDER · CURE
    03 / POWDER + CURE

    Adhesive application and curing

    Adhesive powder is applied to the printed layer, excess powder is removed, and the transfer passes through controlled heat. This sets the adhesive without turning curing into guesswork.

    • Even adhesive coverage
    • Loose powder removed
    • Continuous curing workflow
  4. A finished print on a black garment checked after pressingCHECKED
    04 / QUALITY CONTROL

    Inspect, finish and pack

    The completed transfer is reviewed before it is prepared for dispatch. We look for obvious print, cure and handling issues so problems are caught here—not after you load your press.

    • Surface and edge inspection
    • Order details matched
    • Protected for delivery

What this means for you

Equipment matters. Process control matters more.

Our setup is designed to make repeatable production practical across one-off jobs, gang sheets and ongoing trade work. You get a clear ordering path, locally produced transfers and support when artwork or application needs a second look.

Get a Free Sample Pack